Manage Filaments
View guide
Name
Slug
Category
General-Purpose Filaments
Engineering Filaments
Flexible and Support Materials
Sort order
Dry time
Dry temperature °F
Storage RH
Active
Description
Rigid, low-temperature material and the standard choice for general printing.
Common use cases
Prototypes, organizers, decorative parts, toys, models, and lightly loaded brackets.
Advantages
Easy to print; excellent detail; low warping; inexpensive; broad color selection.
Disadvantages
Relatively brittle; poor heat resistance; can soften in a hot vehicle or direct summer heat; limited fatigue resistance.
Printing tips and recommendations
Use a 0.4 mm nozzle for general work. Print with little or no chamber heat; vent or open the enclosure during long PLA prints to reduce heat creep. Use moderate part cooling after the first layers. Dry if brittle, stringy, or producing a rough surface.
X2D guidance
Best default material. Use the standard 0.4 mm nozzle. Chamber heating is unnecessary; opening the door or venting may help on long PLA prints.
Support-material guidance
Support for PLA/PETG or Support for PLA (interface only); PVA for soluble support; PLA for ordinary breakaway supports.
Save filament
Cancel